×
Call us
+420 517 321 011
Write us

Wipers of guide-way surfaces of machine tools extend their service life.

Types of wiping systems

List of guide-way types for which a cast wiper is available

Types of wiping systems

  • 1. SCHNEEBERGER
    • MR 35 vzor (78.7 kB, Adobe Acrobat dokument)
    • MR 45 vzor (288.1 kB, Adobe Acrobat dokument)
      vzor 2 (287.3 kB, Adobe Acrobat dokument)
    • MR 55 vzor (108.4 kB, Adobe Acrobat dokument)
      vzor 2 (108.8 kB, Adobe Acrobat dokument)
    • BM 35 vzor (31.6 kB, Adobe Acrobat dokument)
  • 2. INA
    • TSX 35 vzor (180.5 kB, Adobe Acrobat dokument)
    • TSX 45 vzor (87.3 kB, Adobe Acrobat dokument)
  • 3. THK
    • SR 35 vzor (106 kB, Adobe Acrobat dokument)
    • SR 55 vzor (83.9 kB, Adobe Acrobat dokument)
      vzor 2 (86.1 kB, Adobe Acrobat dokument)

 

Wipers of precise surfaces

Type S heavy duty wiper in a stainless-steel profile. Wiping profile of PU 85. Suitable for wiping large volumes of chips and liquid on precise surfaces, blade stroke 1 mm. Type S can be fitted with a pre-wiper of flexible stainless steel.
Type E Easy Click wiper for standard applications. The wiping profile of PU 80 is fitted on a steel profile with screw holes. It is suitable especially as a wiper of guide-way surfaces under telescopic covers. The wiper excellently follows the wiped surface with the blade stroke of up to 3 mm
Cast wipers are characterized by high preciseness. The wiper is made of NBR on a steel profile. Cast wipers are mainly designed for serial production

Surface wipers 

DSP8 wiper for small telescopic covers with a stainless-steel supporting profile for welding. The SLP8 wiping profile of the PU85 material is replaceable. The wiper is available in a version with integrated attenuation.
DSP12 wiper for medium-sized telescopic covers with a stainless-steel supporting profile for welding. The SLP12 wiping profile of the PU85 material is replaceable.
DV12 wiper for large telescopic covers with a stainless-steel supporting profile for welding. The SLV12 wiping profile of the PU85 material with a big blade stroke is replaceable.
LP8 wiper for small and medium-sized telescopic covers with a drawn supporting profile for welding. ST1 wiping profile with optimized geometry and reduced passive resistance is replaceable. The wiper is available in a version with integrated attenuation.
LP12 wiper for medium-sized and large telescopic covers with a drawn supporting profile for welding. ST1 wiping profile with optimized geometry and reduced passive resistance is replaceable.

L type wipers for versatile use

L type wipers for versatile use are made of NBR. These are wipers with a vulcanized wiping profile on a 500mm long steel supporting profile.
Types: L12,5, L14, L18, L25, P01, P02, P03

FB-D1 wiper with a pre-wiper. The wiping material is Viton, attached to the supporting steel profile by vulcanization. Viton is highly resistant to wear and it is protected from chips by a stainless-steel pre-wiper.

Characteristics of the wiping materials

Material Hardness (Shore A) Max. application temperature °C short-term/ long-term Resistance to wear Used weping profile type
PU 80 80 ± 2 130 80 Against absorption of water and oil, cooling liquid E18
PU 85 80 ± 2 130 80 Against absorption of water and oil, cooling liquid ST1, SLP8, SLP12, SLV12, stěrače typu S
NBR 80 ± 5 130

 

80 Against absorption of water and oil, cooling liquid stěrače typu L
Viton   140 100 Against absorption of water and oil, cooling liquid  FB-D1/Viton

Downloads

Guide-way wipers.pdf
Guide-way wipers

We look after our customers with utmost care. If you have a question, suggestion, or comment, please do not hesitate to contact us.